-40%
1.5x10
1.5x10
1.5x10

1.5x10" New Meyer Angling Cylinder ram E-47 60 plow Meyers blade 10 blade 05810

$ 50.16

Availability: 61 in stock
  • Brand: aftermarket
  • Refund will be given as: Money Back
  • Condition: New
  • Interchange Part Number: 1304010
  • Manufacturer Part Number: 05810
  • Part Brand: Meyer
  • Return shipping will be paid by: Buyer
  • Restocking Fee: 20%
  • Item must be returned within: 30 Days
  • Returns Accepted: Returns Accepted
  • Warranty: Yes

    Description

    Storks Auto
    Specializing in plows and plow parts
    Bernville PA
    610-488-1450
    Here is a New 1.5x10" 05810 Aftermarket cylinder for a Meyer plow. These were used on ST, STP, TM, TMP, some versions of the C blades.
    We also have
    1.5x12
    and 2x12 cylinders. There are also options like side holes and cross drilled bolt holes that we have available. These are often all pitted up and at that point they should be replaced those pits take in water and will cause freeze up in the pump. So get a new set on there and flush all the
    fluid out
    .  We have the
    hoses listed here
    for the swap.
    Meyer has has a Few Cylinders so make sure this is what you need. This is the most common of all the cylinders they ever had. This style has been used since the late 70's. The measuring system is often misunderstood, This is a 1.5x10" angling cylinder the 1.5" is telling you the size of the rod then the 10" is giving you the movement. ( so it would be the difference between full open 28" and full closed 18" = 10")  In the pictures I have the tape measure laying next to it so you can check yours. These have a 5/8" hole in either end of them. There is a port in the top for a 1/4 pipe thread for the hose.
    Meyer used the part # 05810 & 07968