-40%
10 Inch Black Linear Actuator Stroke Heavy Duty 12 Volt DC 225 Pound Max Lift
10 Inch Black Linear Actuator Stroke Heavy Duty 12 Volt DC 225 Pound Max Lift
10 Inch Black Linear Actuator Stroke Heavy Duty 12 Volt DC 225 Pound Max Lift
10 Inch Black Linear Actuator Stroke Heavy Duty 12 Volt DC 225 Pound Max Lift
10 Inch Black Linear Actuator Stroke Heavy Duty 12 Volt DC 225 Pound Max Lift
10 Inch Black Linear Actuator Stroke Heavy Duty 12 Volt DC 225 Pound Max Lift
10 Inch Black Linear Actuator Stroke Heavy Duty 12 Volt DC 225 Pound Max Lift

10 Inch Black Linear Actuator Stroke Heavy Duty 12 Volt DC 225 Pound Max Lift

$ 25.86

Availability: 90 in stock
  • Refund will be given as: Money Back
  • Condition: New
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted
  • Voltage: 12V
  • Brand: TransMountRacing
  • Item must be returned within: 30 Days
  • Stroke Length: 250mm (10 in)
  • MPN: DMTRL14-10BK
  • Restocking Fee: No

    Description

    Specification DMTRL14-10BK Stroke Length 10” (254mm) Retracted Length 14.13”(359mm) Extened Length 24.13”(613mm) Diameter of Mounting 0.256” (6.5mm) Diameter of Shaft 0.79”(20mm) Rated Load 225 lbs (900N) Travel Speed（Max） 0.39 in/sec (10 mm/sec) Rated Voltage 12 VDC Install Dimension (Min) Stroke Length + 4.13” (105mm) There Might Be Minor Difference Depending On Measure Methods. DESCRIPTION --12 Volt DC,10" Extension. --225 Pound Max Lift. --Speed: 10mm/second. --Retracted length:14.13"(359mm) --Extended length:24.13"(613mm) --DIAMETER of Mounting hole:0.256"(6.5mm) --DIAMETER of Shaft:0.79"(20mm) --Wiring included, pre-installed. --black finish --Built-in clutch prevents over-extending and over-co
    Store category
    Store Home
    Brakes & Brake Parts
    Master Cylinder
    Valve Cover
    Air Cleaner
    Steering Column
    Steering Wheel & Column
    Steering Wheel & Horn Button
    Control Arms
    Radiator
    Cooling Systems
    Water Pump
    Fuel Cell
    Pulleys
    Air Intake & Fuel Delivery
    Bracket
    Steering Shaft & U Joint
    Hood Scoop
    Water Neck
    Ignition Systems
    Air Conditioning & Heat
    Engine Oil Dipstick
    Exterior
    Headers
    Filter
    Fuel Pump
    Oil Pan
    Leveling Lift Kit
    Lighting & Lamps
    Hose End Fitting
    Interior
    Linear Actuator
    Oil Tank
    Overflow Tank
    Suspension & Steering
    Suspension
    Transmission & Drivetrain
    Performance Products
    KS Products
    Other Supplers
    Other
    Sign Up Now !
    You may also like
    10 Inch Black Linear Actuator Stroke Heavy Duty 12 Volt DC 225 Pound Max Lift
    Product Description
    Specification
    DMTRL14-
    10
    BK
    Stroke Length
    1
    0
    ” (
    254
    mm)
    Retracted Length
    14.13”(359mm)
    Extened Length
    24.13”(613mm)
    Diameter of
    Mounting
    0.256” (6.5mm)
    Diameter of Shaft
    0.79”(20mm)
    Rated Load
    225 lbs (900N)
    Travel Speed
    （
    Max
    ）
    0.39 in/sec (10 mm/sec)
    Rated Voltage
    12 VDC
    Install Dimension
    (Min)
    Stroke Length + 4.
    1
    3” (1
    05
    mm)
    There Might Be Minor Difference Depending On Measure Methods
    .
    DESCRIPTION
    --12 Volt DC,10" Extension.
    --225 Pound Max Lift.
    --Speed: 10mm/second.
    --Retracted length:14.13"(359mm)
    --Extended length:24.13"(613mm)
    --DIAMETER of Mounting hole:0.256"(6.5mm)
    --DIAMETER of Shaft:0.79"(20mm)
    --Wiring included, pre-installed.
    --black finish
    --Built-in clutch prevents over-extending and over-compressing.
    --Professional Installation is Highly Recommended
    INSTALLATION (
    WARNINGS
    )
    1. The total load on the actuator (structure weight, structure friction, and possible actuator friction) must be less than or equal to the rated load of actuator.
    2. The moving load must be centered above the actuator extension tube so that actuator lifting point is located at the center-of-mass of the structure.
    Unless the structural design is properly braced, off-centered loads will cause additional friction that can (1) exceed the rated load of the actuator or (2) cause the actuator shaft to bend and permanently fail.
    3. Do not exceed the 10% duty cycle of the actuator: If the actuator is used at full load for 2.5 minutes, then it must remain off for 7.5 minutes.
    Exceeding the duty cycle will cause the actuator motor to overheat and permanently fail.
    User Manual
    Mount the actuator by securing the top and bottom mounting holes to two fixed positions.
    The stroke length of the actuator (e.g. 12 inches) and the limitations of the particular application will determine the location of the fixed mounting positions.
    IMPORTANT: Confirm that up/down movement of the actuator is smooth and within the actuators stroke length after installation.
    Secure the top and bottom mounting holes of the linear actuator onto the two mounting fixtures using 5/16” diameter bolts.
    Connect the red wire to the positive post and the black wire to the negative pst of a 12 volt DC power supply.
    Permanently lubricated sealed shaft
    Perfect for operating tonneau covers, motorized trunks & hoods, amp racks and whatever else you may imagine!
    Payment & Checkout
    Shipping
    Return Policy
    Who We Are
    Contact Us
    Payment & Checkout
    Shipping
    Return Policy
    Who We Are
    Contact Us
    Payment
    Shipping
    Return Policy
    Who We Are
    Contact Us
    Feedback