10 RFC PL-259 Crimp Connectors for LMR-400 RFC-400,8214 9913 RG-8 RG-213 RG-11

Description

Your purchase will consist of Ten (10)
RFC Model 63-8410
PL-259 Type straight Braid Crimp/Tip Crimp type
connectors for
LMR-400, RFC-400, Belden 8214, 9913
and other
400
series coax cables with the larger diameter center conductors. These may also be used with the standard RG-8, RG-213 and others. Optionally, the connector Tips may be Crimped+Soldered or only soldered.
Included with each connector is a 3/4-inch diameter, 1 inch length piece of Therm-O-Sleeve, Polyolefin heat shrink tubing which gives a professional and attractive
appearance to your connector installation. A photo of this heat shrink tubing is shown installed on ECOFLEX 10, a highly flexible, 50-Ohm, low loss RG8 Type LMR-400 equivalent. Personal, friendly and fast shipping service is also included.
Also included with your purchase is our product information sheet with mechanical drawing and recommended cable stripping dimensions and crimp die size for crimping both the coax shield and the center pin. We suggest using our
RFC Model 63-DL-801K
tool in auction number
150992891853
and using die cavities .429 for the body and .129-inches for the center pin.
We also offer an economically priced, professional, ratcheting type crimp tool with optional dies for crimping this and other coax sizes in another EBAY listing.
Crimping is fast becoming the choice for RF Connector fitment. No worries about overheating and distorting the temperature sensitive, gas injected polyethylene dielectric in the new low loss cables, by soldering.
Look closely at the fit & finish of this connector. We've provided a photograph of the actual connector, not a stock, representative or generic photo or drawing.
Generic, stock or representative photos, copied from manufacturers websites, are often used when selling inferior items, or an entirely different item.. Why would a seller not photograph the actual product he wants to sell?
Mechanical:
Superior quality construction consisting of an 85-micron nickel plated brass body and crimp ferrel, and a 30-micron, silver plated brass center tip for low contact resistance. The insulator is
DuPont™
Teflon
®
dielectric known for its inert properties, permittivity, strength, and higher withstanding voltages over a wide range of frequencies and temperatures.
Electrical:
50-Ohm impedance, variable, DC to 300-Mhz (Commonly used up to 512-Mhz range), Voltage Rating of 500V Peak. Operating temperature range is from
-65C to 165C (-85F to 329F)
.
RoHS Compliant
by Directive 2002/95/EC.
We gladly combine shipping with our other items.
USA SHIPPING INFORMATION:
FREE
via USPS First Class with 2-5 day normal delivery time.
We no longer ship internationally.