3-Ft RG-8X Coax Jumper / Patch Cable PL-259 connectors Made N USA HAM VHF UHF CB

Description

Thank you for visiting our store. We would like very much to be your RF Connector and Cable Source.
Quality usually costs more but shouldn't be excessively priced.
Our cables use quality components, assembled with care and are priced right!
Your purchase will consist of  One (1)
RFC Model 671505-03B
, 3 ft. nominal Coaxial Patch / Jumper Cable with UHF PL-259 Type Double Crimp Connectors installed. The connectors have sealed strain reliefs installed. Most reputable connector manufacturers such as RFC, Amphenol and RF Industries, suggest the center contact pins on crimp connectors may be installed by either crimping, soldering or by
crimp + soldering. We have chosen the crimp+solder method for a lifetime solid connection.
The RG-8X coax chosen is the American made TAC Brand with 96% solid copper braid shielding and a 16 AWG, 19/29 stranded copper center conductor for high flexibility. The nominal velocity Factor is 82% indicating a higher quality, minimal loss RG-8X coax. The manufacturer's technical data sheet is included as well as the
RFC Model 63-7401
Connector Data Sheet and Connector drawing for reference.
Do other EBAY sellers furnish their buyers this technical information? I've not found any that do. We want you to know the specifications and composition of both the coax and RF Connector.
The cable tester shown in the photographs is not included in the purchase. Please take time to view all our photographs.
We don't buy cheap Chinese pre-fabricated jumper cables for resale as so many others on EBAY do. We can all buy cheaper patch cables because they are usually made of CHEAPER and inferior materials.
We manufacture each cable in house and test each with our RF Industries Test set before packaging.
I am proud of each jumper cable we make and am sure you will agree, they look great and perform very well.
Mechanical:
Connectors: RFC Model 63-7401
UHF PL-259 Type Crimp Connectors.
80-Micron Nickel Plated Brass Body, DuPont Teflon
®
Dielectric and a 30-Micron Silver Plated Center Pin.
Connector fitment is by Braid to Body Crimp and Center Pin by Crimp+Solder.
Cable:
American
TAC
Brand,
Model 671505
, 96% Copper Braid Shield, 16 AWG Stranded Copper center Conductor, 82% Velocity Factor. Full data sheet included with attenuation tables, etc.
Type IIA
U/V Resistant, Non-Contaminating / Non-Migrating PVC Outer Jacket suitable for outdoor use.
Electrical:
Cable Rating
:
Impedance:
50-Ohm
RMS Voltage Rating:
300
Operating temperature range:
-40C to 80C (-40F to 176F)
.
RoHS Compliant
per Directive 2003/11/EC.
Power Rating:
10-Mhz - 1,000 Watts
30-Mhz -    850 Watts
50-Mhz -    370 Watts
100-Mhz-    250 Watts
400-Mhz-    110 Watts
SHIPPING INFORMATION:
.37
Via First Class Mail with 2-5 day normal delivery time and
.65
for each additional jumper.
No international shipping.