KCD2 LED Rocker Power Switch With Pre-wired 16awg 12in Soldered Leads

Description

This listing is for a KCD2 LED power switch with 12in 16awg full copper core wire soldered (
Kester 186 flux, and Kester #44 solder used for assembly
)  leads for your projects.  This switch is then completed with heatshrink for proper insulation.
I also include a self adhesive vinyl template to cut the hole properly for those installing this switch with hand tools for simplicity.
The switches ratings are below:
15a @ 250v A/C
20a @ 125v A/C
Please review the switch using this written wiring diagram below.
Side of Switch labeled 1a is the Black lead which is the Live lead which goes from the switch to your A/C power source terminal supplying the switch either 120v or 220v depending on your preference.
Side of Switch labeled 1 is the Red Lead which goes to your Load that you want the switch to cycle on, and off. The L terminal on most electrical components like power supplies is where this lead would get hooked up as its the lead that supplies the voltage (either 120v, or 220v depending on which voltage you chose to power the switch with)
Side of Switch labeled 2a is the White lead which goes to the Neutral terminal that comes from the A/C power source.
Side of switch labeled 2 is also a White lead which goes to the component's Neutral terminal that you want the switch to be able to cycle on, and off. This is labeled N on most power supplies, and other electrical components.
The dimensions of this switch are in the pictures above.
Shipping is free in the US. International shipping is welcome with adjusted shipping cost. Please message me for pricing.