New Meyer Pistol grip control controller Meyers E-47 60 22154 Diamond

Description

Storks Auto
Specializing in plows and plow parts
Bernville PA
610-488-1450
Here is a Quality aftermarket hand held control, this is made For Meyer and Diamond plows. We also sell the Buyers touch pad and the
factory Meyer 22154 control
. This is a direct plug in it has the 6 pin white plug as you see in the picture. Our website is on the control and you can buy it cheaper there.
strait blade aftermarket control instructions
Aftermarket control uset instructions
The early touchpads had a Black round plug with 6 pins. This was soon replaced with this white plastic plug.  If you have the old harness with the round black rubber plug you can buy this
adapter 15766
to mate to the new control. If you do not have the correct harness you need
15764
. If you have toggle switches or a
Joystick
and you want to switch over you need a new harness but if you want to tackle cutting the harness and adding the touchpad plug you can cut and wire this adapter in
adapter 15766
.
Control plugs directly into your existing harness, NO adapter required, just Plug-N-Plow
Please make sure the connector matches your connector before ordering
4 way operation
Automatic Shut-off when not in use, approximately 22 minutes
The plow blade will coast to a soft stop (left or right), results in smoother operation and decreased wear on the plows hydraulic system
Express Up/Down Feature
On/Off switch can be used as an Emergency Stop when required
Illuminated keypad on control for night time plowing
All control functions will time out (shut-off) after a period of time. This helps reduce wear on the pump motor and prevent unnecessary battery drain, Up-button, times out after 2.6 seconds, while left and right functions time out after 3 seconds
Flexible Straight Cord
Use for both Left or Right Hand
Dash Mount Control Holder Included
Instructions come with each control
Designed and Manufactured in the U.S.A.