-40%
Set Genuine Diamond 1.5x10 power angling cylinders with hose and coupler
Set Genuine Diamond 1.5x10 power angling cylinders with hose and coupler
Set Genuine Diamond 1.5x10 power angling cylinders with hose and coupler
Set Genuine Diamond 1.5x10 power angling cylinders with hose and coupler

Set Genuine Diamond 1.5x10 power angling cylinders with hose and coupler

$ 87.11

Availability: 99 in stock
  • Refund will be given as: Money Back
  • Returns Accepted: Returns Accepted
  • Warranty: Yes
  • Return shipping will be paid by: Buyer
  • Condition: New
  • Manufacturer Part Number: 81700020
  • Item must be returned within: 30 Days
  • Part Brand: Meyer
  • Brand: diamond
  • Interchange Part Number: 80061
  • Restocking Fee: 20%

    Description

    Storks Auto
    Specializing in plows and plow parts
    Bernville PA
    610-488-1450
    Here is a New 1.5x10" Genuine Diamond power angling cylinder part # 817000 020. These were pulled out of New pump kits that we took apart. you get just what you see they have hoses couplers and oil in them already. This was used on all the Diamond blades with 1" pin holes. The Cylinder assembly #s are 80061, and 80062, The hose part # is 816000095034, elbow is 8752202004004. The couplers on the hoses are part # 22291 and 22292.
    These are often all pitted up and at that point they should be replaced those pits take in water and will cause freeze up in the pump. So get a new set on there and flush all the
    fluid out
    .  We have the
    hoses listed here
    for the swap.
    Here are some measurements to make sure this is what you need. The pin holes are 1", the port is 1/4 pipe thread and comes out the side of the cylinder, in the closed position the center of hole to center of hole is 17-1/4", Closed end to end measures 18-3/4".
    This is an OEM cylinder but The aftermarket # on these cylinders is 1304100.