UP TO 5 DEL-TRON POSITION LINEAR PRECISION 2" STROKE CROSSED ROLLER SLIDES RN-3

Description

You are bidding on up to 5 Precision Crossed Roller Slide Assembly manufactured by Del-Tron, Model RN-3.
Each bid is for ONE Slide.
The slide has 2 inches of precision stroke.
The rated load capacity of Del-Tron ball slides may be a mass load on a horizontal slide,or a force load normal to the mounting surface in any position. The rated load must be centered and distributed over the slide, and the base must be fully supported on a flat mounting surface so that the ball slide does not act as a beam subject to concentrated or distributed bending forces. Loads supported by protruding arms reduce accuracy and load capacity by acting as levers or ratio arms, and should be avoided even when load forces are small.
When used at the rated load capacity and moderate speeds, a life of 10 million inches of travel can be expected.The expected life at one half the rated load is 100 million inches.
Mounting surfaces, parallel to the line of motion, provide straight line accuracy to 0.0005"/" of travel
LOAD RATING - 220 LBS.
Threaded mounting holes provided for fixturing
Crossed Roller Slides - Inch
Family: RN
Model: RN-3
Price: $ 225.00
The standard finish is a black anodize carriage and black anodize base.
Carriage 4 Holes (I)
6-32 UNC-2B THREAD
Base Hole d
.157
Base Hole D
1
.244
Base Hole h
.150
Counter Bore Screw Size
#6
All dimensions in inches unless otherwise specified
Carriage Hole
Spacing
Base Dimensions
Model
Price
$
Travel
Load
(lbs)
Weight
(oz)
Length
A
Height
B
Width
C
D
E
F
G
H
Accuracy
(in/in of travel)
RN-3
225.00
2
220
3.1
3.56
0.53
1.06
3.250
0.437
0.312
0.500
3.125
.0001
For more Information see:
(
https://www.deltron.com/search/Slides_Ball_Crossed_Roller_Model.aspx?pkid=2965
)
Del-Tron Precision, Inc., the originator of the sub miniature linear bearing assembly; Del-Tron Precision Inc. began operations in 1974 supplying original equipment manufacturers with the world's first commercially available sub miniature linear bearing slide, model D-1.
This slide is perfect for a precision axis or any requirement for a precision movement - new cost 5.
Shipping in the Continental US is .99 - I have very competitive rates for our always welcomed International bidders.
I will fully guarantee this slide - more and different sizes available.
Powered by SixBit's eCommerce Solution